Daewoo DTQ 25S5FC Instruction Manual

Daewoo DTQ 25S5FC Instruction Manual Manual pdf 31 page image

26 Chapter 6 : Adjusting the SoundUsing Direct button on the remote control1 You can also change the Audio Mode setting with the remote control. Press the MTS button onthe remote control to select Audio Mode.2 Use this button to select the Stereo, Mono or SAP.Adjusting the Bass1 With the TV turned on, press the MENU button until “Audio” menu will be displayed.2 Use the WCHV buttons select “Bass” item.3 Press the CVOL button to decrease the bass volume.4 Press the VOLB button to increase the bass volume.5 Press the MENU button twice or wait few seconds to return to normal TV viewing.6 Your setting will remain intact until you change it. Your TV will then automatically reproduceeither stereo or monaural sound, whichever is broadcast.NoteIf a broadcast signal is weak, it may cause noise and hum in stereo sound. Please select the Monomode, the noise and hum should be reduced.Present Broadcast Your Selection Speaker OutMONO Stereo MonoMONO SAP MonoSTEREO SAP MonoSTEREO and SAP Stereo StereoSTEREO and SAP SAP SAPSelectAudioAudio Mode: MonoBassTrebleBalanceAdjust Exit1SelectAudioAudio Mode: MonoBassTrebleBalanceAdjust Exit2SelectAudioAudio Mode: MonoBassTrebleBalanceAdjust Exit3SelectAudioAudio Mode: MonoBassTrebleBalanceAdjust Exit4