Daewoo DTQ-29S5SC Instruction Manual

Daewoo DTQ-29S5SC Instruction Manual Manual pdf 13 page image

Operating Your TVOnce you have connected your TV to an antenna or cable system, plugged the TV in, and put batter-ies in the remote, you are ready to use the TV. The first thing you should do is to program your TVso it memorizes all of available channels.Turning Your TV On1 To turn your TV on, press the POWER button on the remote control. Youcan also use the POWER button on the front panel. Make sure your TV isplugged in before you try to turn it on.Programming Your TV's Channel MemoryYour TV's memory determines the channels that are available using the WCHV buttons. If a chan-nel is not in memory, you can tune to it with the number buttons, but not with the WCHV buttons.Follow these steps to program your TV's memory:1 With the TV on, press the MENU button twice, then “Set-Up” menu will appear.2 Use the WCHV buttons to select “Reception”, then use the CVOLB buttons to select ‘Air’ or‘Cable’. If you connected an antenna to your TV, select ‘Air’; If you connected a cable system,select ‘Cable’.3 Use the WCHV buttons to select “Memorize Channels”, then use the CVOLB buttons to enterthe “Memorize Channels” process.4 Press the MENU button to return to Set-Up menu.5 Press the MENU button four times to return to normal TV viewing.Your TV's channel memory will not be affected by a power outage. You will not need to re-programthe memory unless you change the type of cable or antenna connected to your TV.9Chapter 3: Operating Your TVSelectSet-UpLanguage : EnglishReception : AirMemorize ChannelsAdd/Delete ChannelsInput : TVAdjust Next3-1SelectSet-UpLanguage : EnglishReception : AirMemorize ChannelsAdd/Delete ChannelsInput : TVAdjust Next2Memorize ChannelsAir 11Memorizing all air channels.Please, stand by.Press MENU to cancel andreturn to Set-Up menu.3-2 5SelectSet-UpLanguage : EnglishReception : AirMemorize ChannelsAdd/Delete ChannelsInput : TVAdjust Next4C H A P T E R 3