Daewoo DTQ-29U1SC Instruction Manual

Contents

15Chapter 3 : Operating Your TVReturning to the factory settingsIf you would like to return to the original video settings, as they were calibrated at the factory, fol-low these steps :1 With the TV on, press the MENU button. Then “Video” menu will appear.2 Select the “Settings” item by use of the WCHV buttons. Then Press the CVOLB buttons to setthe “Settings” to ‘Standard’ or ‘Soft’.The TV will remember the ‘User’ settings you had previously chosen. When you set “Settings” to‘User’ again, your previous User settings will be restored.Descriptions of video settingsThe Contrast setting controls the relation between the light and black areas of the screen. If the lightareas are too bright and are losing details, press the CVOL button; if the picture is gray and lackscontrast, press the VOLB button.The Brightness settings controls the overall amount of light in the picture. If the picture is too bright,press the CVOL button; if the picture is too dark, press the VOLB button.The Sharpness controls how the TV displays edges of objects on-screen. If the TV shows multiplevertical lines at the edges of an object, press the CVOL button; if the vertical edges of on-screenobjects are fuzzy, press the VOLB button.The Color setting controls the intensity of color. If the color is over-saturated, press the CVOL but-ton; if the color is washed out, press the VOLB button.The Tint setting controls the relationship of red and green in a picture. Tint is especially noticeablein flesh tones. If flesh tones seem too red or purple, press the VOLB button; if flesh tones are toogreen, press the CVOL button.