You can also call up the PRESET menu at the MAIN MENU.Press the NUMBER buttons 0..9 or UP/DOWN buttons toselect a programme number you want.The screen will change according to the selected programmenumber.SEARCHING A CHANNELSLocate a cursor to “ ” with LEFT/RIGHT buttons and thenpress the UP or DOWN button.The tuning screen will appear and the cursor will move fromleft to right or right to left.Pressing and holding down the UP/DOWN buttons during 2seconds, the band will change as follows:VL-VH-U (For GB, U only).After searching a station, the tuning screen will disappear.To stop searching, press the MENU button.FINE TUNINGIf you are unable to get a good picture or sound because of apoor broadcasting signal, it is possible to adjust the fine tuning.Move the cursor to and press UP or DOWN button toactivate fine tuning up or down.It only operates while the UP or DOWN button is beingpressed.ENTER A STATION NAMESelect station name in the station name list with UP/DOWNbuttons and press OK button.If you want to delete a station name, select "----".If you can't find the desired name in the list, you can enter yourown.To do so, move the cursor to the right and press OK button.Using the UP/DOWN buttons, select the desired letter, numberor blank.Press the RIGHT button to select the next position.Press the OK button to complete this procedure.TO STORE PROGRAMME IN MEMORYMove the cursor to the right end with the LEFT/RIGHT buttons.Select the programme number that you want to store currentdisplaying programme with station name, fine tuning datausing the UP/DOWN buttons or NUMBERS 0..9.Press the OK button.MANUAL CHANNEL SETTINGPRESETP01 PSEARCH UHF >>PRESETP01 PFINE TUNE UHF >PRESETP01 PPRESETP01 BBC1 PPRESETP01 BBC1 P02- - - -DRFSBBC1BBC2ITUCH49