TIMERCLOCK 12:20WAKE UP TIME --:--ACTIVATE YESWAKE UP PROG P 45TIMERCLOCK 12:20WAKE UP TIME 17:00ACTIVATE YESWAKE UP PROG P 45In the MAIN MENU, Select TIMER menu.SETTING THE CLOCKPress the OK button on the CLOCK line.Set the hours and minutes with the NUMBER button 0..9 Press the OK but-ton to complete. The clock will start.Note that if you turn the TV off with MAIN POWER button, the clock settingis lost and must be reset if necessary.SETTING THE WAKE UP TIMESet WAKE UP TIME in a same way to the above for CLOCK.Set ACTIVATE "YES" or "NO" with the LEFT/RIGHT button.When ACTIVATE is "YES", the function is enabled.Set WAKE UP PROG using the NUMBER button 0..9 or UP/DOWN button.When WAKE UP TIME is operate, the set will switch on to this programmenumber.TIMERBy pressing the SLEEP button repeatedly, you can select one of the follow-ing setting:0->30min. ->60min. ->90min. ->120min. ->0The set will turn off after time you select.Automatic Switch-Off in No broadcast SignalIf a broadcasting signal is not present for about 5-30 minutes, the set will beautomatically turned off.In AV mode, however, this function dose not operate.SLEEPThe RECALL button is used to display the current status: programme num-ber, station name and clock.This display appear for 5 seconds unless any button is pressed.RECALL8