17BASIC OPERATIONSSYSTEM SETTING• When you press the [SYSTEM] button, the TV screen showsthe information as : “If you want to change, press[SYSTEM] again.” Press the [SYSTEM] button again, thevideo out system changes as follows.According to the system of the TV to be connected, set the system of the unit tomake it match the TV.In STOP mode, press SYSTEM button on the remote control, then choose TV TYPE.SYSTEMPAL Auto NTSCV-MODE (WHEN SELECTING S-VIDEO/INTERLACE/RGB/PROGRESSIVE/HD mode)V-MODEThere are variety of ways to connect the DVD player to your TV.(refer to 14page)Choose one of the following video output modes by pressing[V-MODE] button, depending on the connection from DVDplayer to your TV.• Scart connection - RGB mode• Component connection - Progressive mode or Interlace modeCheck whether your TV has the function of progressive before selectingprogressive mode. If your TV does not accept the progressive, you can selectthe Interlace mode.• S-Video connection - S-video mode• Composite connection - Interlace mode• HDMI connection - HD mode (For more details, refer to 15page)When video output mode is not proper for the connection, no picture or nosound may occur.NNote:When you use the SCART connection together with the S-Video connection orthe Component (Y, Pb, Pr) connection, the picture of RGB (Scart) mode maydim.EasternDV- 3500H Eng 2008.9.20 6:37 PM ˘ ` 17