32USING A DVANCED VCR FEATURESAuto Playback With Auto Play turned on (the factory default setting), the DVD+VCR player automatically startsplayback when you insert a tape with its safety tab removed.Press [SETUP] and select“FUNCTIONS”.Move to “FUNCTIONS” with [†] andpress [ENTER].Press [ENTER] to switch betweenON and OFF.- Select ON if you want a tape with itssafety tab removed to start playingautomatically when the tape isinserted.- Select OFF if you do not want a tapewith its safety tab removed to startplaying automatically.12SETUPCLOCK SETTIMER RECORDINGSCHANNEL SETFUNCTIONSLANGUAGE SELECTFUNCTIONSAuto Play: ONAuto TV/VCR: ONIndex SearchGo-To SearchSet Auto RepeatMove: Select:End: SETUPENTERMove: Select:End: SETUPENTERSwitch the VCR to TV or VCR mode automatically Auto TV/VCR Controls whether the DVD/VCR’s TV/VCR setting changes automatically to VCR-viewing mode when turned on.Press [VCR] to enter VCR mode. Press [SETUP] and select“FUNCTIONS”.Move to “FUNCTIONS” with [†] and press [ENTER].Press [ENTER] to switch between ONand OFF.- Select ON if you want the VCR to switchto the VCR mode when the VCR isturned on or a cassette is inserted. Thisonly applies if you connect the ANT.INand RF OUT jacks of your VCR and TVand watch your VCR on channel 3 of your TV.- Select OFF if you want the VCR to remain in TV mode. This isuseful if you watch your VCR on the TV’s video input and you don’twant your antenna/cable signal interrupted by the VCR.21 FUNCTIONSAuto Play: ONAuto TV/VCR: ONIndex SearchGo-To SearchSet Auto RepeatMove: Select:End: SETUPENTER