Daewoo DV-K486N User Manual

Contents

Daewoo DV-K486N User Manual Manual pdf 17 page image

4 The tape counter is displayed on the screen. Inputthe tape counter you want to go and press REW orFF, the VCR will search for the time counter youwant.Marking a tape for zero search1 Use PLAY, REW, or FF to reach the point on the tapethat you would like to marks as 0:00:00.2 Press DISPLAY to display the tape counter on thescreen.3 Press CLEAR to reset the tape counter to 0:00:00.4 You can continue to play the tape or perform otherfunctions with the VCR.Play the tape automaticallyThis feature allows the VCR to automatically start playingwhen you insert a tape with the safety tab removed.1 Press MENU to display the menu.2 Press 4 to choose Preferences3 Press 1 to switch between ON and OFF- Select ON if you want a tape with its safety tabremoved to start playing automatically when the tapeis inserted.- Select OFF if you do not want a tape with its safetytab removed to start playing automatically.Using advanced features,continuedDaewoo Video Cassette Recorder User’s Guide 26Using advanced featuresSearching a cassette tape for programs (indexing)When you record a programs, the VCR places an indexmark at the start of the recording. To search for an indexmark:1 Press MENU to display the menu.2 Press 4 to choose Preferences.3 Press 4 to choose Index Search.4 If you want to search through a certain number ofindex marks, press two number buttons to enter thenumber of marks you want to search. Press CLEAR onthe remote to correct an entry.5 Press REW to search backward or FF to searchforward. The VCR will locate your index mark andbegin playback. If you did not enter a specific indexnumber, the VCR will locate the next index mark andbegin playback. Press STOP to stop index searching.Searching with the tape counter (go- to search)You can mark a segment of the video cassette with the tapecounter that will help you easily locate the segment later.1 Press MENU to display the menu.2 Press 4 to choose Preferences.3 Press 5 to display Go-To Search.INDEX SEARCHPress REW or FFto begin searchingorEnter a specificIndex number- -Press MENU to exitDaewoo Video Cassette Recorder User’s Guide!• If two recordings overlap, theindex mark for the second pro-gram will be erased. Therefore,when you use the index featureto find the second program, theVCR will skip over it .• If you record multiple pro-grams in one recording session,the VCR will only find the indexmark that was placed on thevideo cassette tape when therecording session began.! Some index marks that may bemissed by the VCR :• A mark too close to your loca-tion on the tape.• The mark at the beginning of arecorded segment of five minutesor less.• The first index mark on thetape when you start at the begin-ning of the tape.Go-To SEARCHCurrent tape counter is2:17:28Press REW or FFto go to - - : - - 00Press MENU to exitPREFERENCES1 Auto Play: ON2 Auto TV/VCR: ON3 Energy Saver: 2:004 Index Search5 Go-To SearchPress MENU to exit4The following informationabout video cassettes andthe tape counter will helpyou use the go-to search fea-ture:• When you insert a videocassette, the counter alwaysresets to zero.•The counter does not operatewhen a blank video cassetteor a blank portion of a videocassette is played.•If the tape is rewoundbeyond 0:00:00, the tapecounter will display a negativetime count.25