13Top Cover Removal (Fig. 1)1. Remove three(3) screws Holding the top cover.2. Carefully lift the back of top cover and slide it to the rear toremove it.Front Panel Removal (Fig. 2)1. Continued from (Fig. 1).2. Remove two(2) screws securing front panel & F/L bracket.3. Release seven(7) tabs holding the front panel.(Release bottom tabs first)4. Remove the F/L bracket.5. Remove the front panel.Bottom Cover Removal (Fig. 3)1. Remove the top cover and the front panel.2. Remove two(2) screws.3. Lift out the bottom cover in the direction of the arrow.F/L Door Removal (Fig. 4)1. Open the F/L door 90 degrees.2. Remove the F/L door in the direction of the arrow.INOUTCHRemove three screws.Remove two screwsFig. 1 - Top Cover RemovalFig. 3 - Bottom Cover RemovalFig. 2 - Front Panel Removal Fig. 4 - F/L Door RemovalINSTRUMENT DISASSEMBLYPerform all disassembly procedures in the order presented. When reassembling, use the reverse procedure. Make sure that allleads/wiring are routed correctly when reassembling.