Daewoo DV6T534B Owner's Manual

Also see for DV-6T834B: Owner's manual Owner's manual Owner's manual

Contents

Daewoo DV6T534B Owner's Manual Manual pdf 17 page image

29VCR Operation28Press [SETUP] button and select“FUNCTIONS”.Select “Index Search”.11n When you record a programs, the VCR places an index mark at the start of the recording. To search for anindex mark:FUNCTIONSAuto Play: ONAuto TV/VCR: ONIndex SearchGo-To SearchIf you want to search through a certain numberof index marks, press two number buttons toenter the number of marks you want to search.Press CLEAR on the remote to correct an entry.orPress REW to search backward or FF to searchforward. The VCR will locate your index markand begin playback. If you did not enter aspecific index number, the VCR will locate thenext index mark and begin playback. PressSTOP to stop index searching.22 INDEX SEARCHPress REW or FFto begin searchingorEnter a specificindex number- -End: SETUP• If tworecordingsoverlap, the indexmark for the secondprogram will beerased. Therefore,when you use theindex feature to findthe second program,the VCR will skipover it.• If you recordmultiple programs inone recordingsession, the VCR willonly find the indexmark that wasplaced on the videocassette tape whenthe recordingsession began.Searching a cassette tape for programs (indexing)Press [SETUP] button and select“FUNCTIONS”.Select “Go-To Search”.11n You can mark a segment of the video cassette with the tape counter that will help you easily locate thesegment later.FUNCTIONSAuto Play: ONAuto TV/VCR: ONIndex SearchGo-To SearchThe tape counter is displayed on the screen.Input the tape counter you want to go and pressREW or FF, the VCR will search for the timecounter you want.22 GO-TO SEARCHCurrent tape counter is2 : 17 : 18Press REW or FFto go to - : - - : 00Some indexmarks that maybe missed by the VCR :• A mark too close toyour location on thetape.• The mark at thebeginning of arecorded segment offive minutes or less.• The first index markon the tape whenyou start at thebeginning of thetape.Searching with the tape counter (go- to search)Using advanced featuresUsing advanced featuresPlay the tape automaticallyn This feature allows the VCR to automatically start playing when you insert a tape with the safety tabremoved.Press [SETUP] button and select“FUNCTIONS”.Move into “FUNCTIONS” with [ ] andthen, select the desired one with [ENTER]button.Press [ENTER] to switch between ONand OFF.- Select ON if you want a tape with its safetytab removed to start playing automaticallywhen the tape is inserted.- Select OFF if you do not want a tape withits safety tab removed to start playingautomatically.1122SETUPCLOCK SETTIMER RECORDINGSCHANNEL SETFUNCTIONSLANGUAGE SELECTFUNCTIONSAuto Play: ONAuto TV/VCR: ONIndex SearchGo-To SearchMove: Select:End: SETUPENTERMove: Select:End: SETUPENTERSwitch the VCR to TV or VCR mode automaticallyn This feature controls whether the TV/VCR switch changes automatically to the VCR mode when the VCR is turned on.Press [SETUP] button and select “FUNCTIONS”.Move into “FUNCTIONS” with [ ] and then, select the desired one with[ENTER] button.Press [ENTER] to switch between ONand OFF.- Select ON if you want the VCR to switch tothe VCR mode when the VCR is turned onor a cassette is inserted. This only applies ifyou connect the ANT.IN and RF OUT jacksof your VCR and TV and watch your VCR onchannel 3 of your TV.- Select OFF if you want the VCR to remainin the TV mode. This is useful if you watchyour VCR on the TV’s video input and youdon’t want your antenna/cable signalinterrupted by the VCR.2211 FUNCTIONSAuto Play: ONAuto TV/VCR: ONIndex SearchGo-To SearchMove: Select:End: SETUPENTER11 Use PLAY, REW,or FF to reach the point on the tape that you would like to mark as0:00:00.22 Press [DISPLAY] button to display the tape counter on the screen.33 Press [CLEAR] button to reset the tape counter to 0:00:00.44 You can continue to play the tape or perform other functions with the VCR.Marking a tape for zero search