Daewoo DVQ-13H1FCN Service Manual

Contents

ALIGNMENT INSTRUCTIONS1. SERVICE MODE ADJUSTMENTSFollow the steps below whenever service adjustment is required. See Table-A.and Table-B to determine if service adjustments are required.1)How to enter the service mode using the user remote control.w Turn the set on.w Direct the remote control to the reception window of your TV/VCRw Push buttons of remote control in sequence as follows.1 Z MUTE Z RECALL Z MUTEw Then, the screen will appear as follows.w Using the channel up ( s ) or down ( t ) buttons, select the item you wish to adjust..The curser ( U ) move you wish to adjust item.w Using the volume up ( U ) or down( ) buttons to enter in the sevice mode you wish to adjust.w You adjust the values of service mode, automatically save to EEPROMTable-A : Adjust the values of service mode when a part is replacedPARTREPLACEADJUSTMENT NOTENECESSARY UNNECESSARYICS01(TIMER/SYSCON) O Data is stored in IS03(EEPROM)I501(TV CHROMA) OIS03(EEPROM) OInitial setting values are written from ICS01Adjusting ItemsS5:IFC, S6:GEO, S8:W/B, S9:DP, S11:PG AdjustCRT O Adjusting ItemsS2:SCRN, S6:GEO, S8:W/B, S9:DPVCR DECK(DRN-7203) O Adjusting Items related to VCR DECK only.S10:ATK OFF, S11:PG AdjustICY01(VCR Y/C) OUS2S5S6S8S9S10S11S12FIELE SVCSCRNIFCGEOW/BDPATK OFFPG AdjustFACT8