Daewoo DVR-S05 User Manual

Contents

Daewoo DVR-S05 User Manual Manual pdf 18 page image

PLAYBACK3130DVD PlaybackDVD Playback1 Press the [DVD] button to set the remote control to operate the DVD deck.Turn the TV on and select the video input source connected to the DVD Recorder+VCR.Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.2 Press [EJECT] to open the disc tray.3 Load your disc in the tray with the playback side down (label side up).4 Press [EJECT] to close the tray.5 READING appears on the front panel display, and playback starts automatically. If playback does not start,press [PLAY (√)]. In some cases, the Disc menu might appear instead.Playing a DVD+R (+RW)When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channeldisplays on the screen.If you want to play a title on the DVD+R (+RW), you must press [MENU] or [PLAY] to display the disc menu.Select a title to play then press [ENTER].Playing a DVDIf a Disc menu is displayed• A Disc menu may be displayed when you load a DVD. Use the [œ √…†] buttons to select the title/chapter youwant to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.• If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code mustbe entered and/or the disc must be authorized; see ‘Set Parental Level‘ on page 24.• The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Regioncode for this DVD Recorder+VCR is 1 (one).• Unless stated otherwise, all operations described below use the remote control. Some features may also beavailable in the Setup menu.• A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.• A disc which is recorded with unauthorized movie material may not be played.• A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.Still Picture and Frame-by-Frame Playback1 Press [PLAY/PAUSE] during playback. The DVD Recorder+VCR will go into Pause mode.2 You can back up or advance the picture frame-by-frame by pressing [FF (√√)] repeatedly during Pausemode.Fast Forward/Backward1 Press [REW (œœ)] or [FF (√√)] during playback. The DVD Recorder+VCR will go into Search mode.2 Press [REW] or [FF] to select the desired speed: √√ X2, √√ X4, √√ X8, √√ X16, √√ X32, √ (forward) orœ, œœ X2, œœ X4, œœ X8, œœ X16, œœ X32 (backward).On-Screen Display OverviewChapterShows the current chapter number and total number of chapters, and skips to the desired chapter number.1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.2 Use […†] to select the ‘Chapter‘ icon on the on-screen display. Press [ENTER] to display a submenu.3 Use […†] to change the numbers.4 Press [ENTER] to confirm.AngleShows the current angle number and total number of angles, and changes the angle number.1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.2 Use […†] to select the ‘Angle‘ icon on the on-screen display. Press [ENTER] to display a submenu.3 Use […†] to change the numbers.4 Press [ENTER] to confirm.AudioShows the current audio soundtrack language, encoding method, and channel number, and changes the setting.1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.2 Use […†] to select the ‘Audio‘ icon on the on-screen display. Press [ENTER] to display a submenu.3 Use […†] to change the numbers.4 Press [ENTER] to confirm.SubtitleShows the current subtitle language, and changes the setting.1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.2 Use […†] to select the ‘Subtitle‘ icon on the on-screen display. Press [ENTER] to display a submenu.3 Use […†] to change the numbers.4 Press [ENTER] to confirm.ElapsedShows the elapsed playing time, and skips to the desired time.1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.2 Use […†] to select the ‘Elapsed’ icon on the on-screen display. Press [ENTER] to search by time. Thesubmenu appears.3 Use […†] to change the numbers and use [œ √] to move left or right.4 Within 7 seconds, press [ENTER] to confirm the start time. Playback starts from the selected time on thedisc.• For the title recorded without DVD navigation information, such as the one from broadcast or line input, “Elapsed”function does not work.