108. HOW TO DISASSEMBLE1 Before service of 1. Stop the unit, remove the power cord from the receptacles.any part. 2. Move the unit to the safe location for the suitable work.2 Ass’y Fan Motor 1. Remove Front Grill- Fan Motor - Remove Filter Pre.- Propeller Fan - Remove screw(1 point) in Front Grill.- Blower Fan 2. Remove Cabinet from the unit.- Remove screws (8 point) from the unit’s sides.3. Remove Screw (1 point) from Panel Housing’s Side and Remove Holder EVA.4. Remove Ass’y Control Box- Remove screws (5 point).- Remove wires in the each components.5. Remove Plate Scroll6. Remove wires in the Panel Housing.7. Remove screws (7 point) from Ass’y Fan Motor’s sides.- Ass’y Fan Motor is assembly of Fan Motor, Propeller and Blower Fan, Orificeand Panel Housing.8. Lift the Ass’y Fan Motor from the unit.9. Remove Clip Fan (2 point) from the shaft of Fan Motor.10. Remove Propeller Fan from the shaft of Fan Motor.11. Remove Blower Fan from the shaft of Fan Motor.12. Remove Scroll13. Remove Fan Motor from Panel Housing.- Remove screws (4 point).3 Ass’y Control Box 1. Same as the procedure 1 to 4 in the Item 2.- Rotary Switch (selector)- Thermostat- Capacitor- Power Cord4 O.L.P 1. Same as the procedure 1 to 2 in the Item 2.2. Remove Terminal Cover from Compressor.- Remove hex-nut (1 point).Please refer to the chapter 11 (Exploded diagram and parts list).