9INSTALLATION■ Level adjustment1. The level adjustment of the washing machine pre-vents excessive noise and vibration.Install the washing machine on a solid and evenfloor surface, if possible, in a corner of the room.Note: the wooden floor may cause excessivevibration.2. If the floor is uneven, adjust the adjustable leg asthe following.(Do not insert pieces of wood etc. under legs.)• Please check whether there is any gap betweenfour adjustable legs and the floor.• Turn adjustable legs by the enclosed spanner inorder to adjust the level of the washing machine.• Make it sure that there is no swaying of the wash-ing machine and check that the washingmachine is even completely. (use a spirit level)• After the level adjustment is finished, turn fixingnuts up tightly so that the washing machinemaintains the adjustment.leglegFixing Nut❈ Diagonal CheckWhen pushing down the edges of the washingmachine top plate diagonally, the machine shouldnot move up and down at all.(Please, check both of two directions)If machine rocks when pushing the machine topplate diagonally, adjust legs again.