Daewoo DWD-F1021 Instruction Manual

Contents

Daewoo DWD-F1021 Instruction Manual Manual pdf 4 page image

4Removing transit bolts1. Before operating the washer, remove thetransit bolts(3ea) along with the rubber.• If the bolts are not removed, it may causeheavy vibration, noise and malfunction.2. Unscrew the 3 bolts with the 10mm hexwrench or spanner or cross-tip screwdriver.Keep the 3 bolts for a later time.• When the appliance is transported, transitbolts will be re-used.3. Close the holes with the cap holders supplied.Location of washer• Check location where the washer will be installed. Make sure you have everything necessary forcorrect installation.• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.• Do not place or store laundry products on top of washer at any times.• Install the washer on the horizontal solid floor.If the washer is installed on an unsuitable floor, it could makeconsiderable noise, vibrate severely and cause a malfunction. If thewasher is not level, adjust leg up or down for horizontal installation.• Ventilation openings must not be obstructed by carpeting when thewasher is installed on a carpeted floor.• Leave some space (right & left : 2cm, rear : 10cm).• In case of built-in installation, the distance between top of the washerand bottom of upper plate should be at least 3mm.INSTALLATION INSTRUCTIONSLaundryTubWasherapprox.2cmDrain Hose