Daewoo DWD-FU1051 Instruction Manual

Contents

Daewoo DWD-FU1051 Instruction Manual Manual pdf 5 page image

5The washer should be connected to the water mains using new hose sets and old hose setsshould not be reused.In using only one water tap or in case of only one water inlet valve, connect the inlet hose to thecold water inlet valve.Option : Be careful not to confuse hot water inlet and cold water inlet.For Ordinary TapINLET HOSE CONNECTION1 Pull down the collar ofthe inlet hose to separateit from the water tapadapter.2 Loosen the four screwsproperly in fitting intowater tap.3 Fit the water tap adapterinto the water tap andtighten the four screwsevenly while pushing upthe adapter so that therubber packing canattach to the water taptightly.1 Connect the inlet hose tothe water tap byscrewing the connectortightly.2 Connect the connector-inlet supplied ifnecessary.3 Insert the inlet hoseadapter into the waterinlet of a washingmachine and turn it to befixed. .4 Remove the tape, andscrew connector B intoconnector A tightly.5 Connect the inlet hose tothe water tap adapter bypulling down the collar ofthe hose end.6 Connect the inlet hoseadapter of the hose tothe water inlet of thewashing machine byturning it clockwise to befixed tightly.For Screw-Shaped Tap• Please check the rubberpacking inside the inlet hoseadapter of the hose.* Cheek the packing in the inletConnector AConnector BConnectorHose ConnectorRubberPackingConnectorinletConnectorHose ConnectorRubberPackingTAPE