5INSTALLATION Electrical requirements• The washer should be connected to the water mains using new hose sets, old hose sets should not be reused. Drain system• Never forget to install drain hose before operating your washer.• Open the packing box, and there is a drain hose inside the drum.• Connect the drain hose to the drain outlet at the back side of the washer.• Top of laundry tub must be at least 60cm high and no higher than 100cm from the floor.• When installing the drain hose to tub (sink), secure it tightly with a string.• Proper securing of the drain hose will protect the floor from damage due to water leakage.• When the drain hose is too long, do not force it back into the washer. This will cause abnormal noise.• Electrical earth is required on this washer• If it does not fit the outlet, have a proper outletinstalled by a qualified electrician.• Do not earth to a gas pipe.• Do not change the power supply cord plug.• Check with a qualified electrician if you are notsure the washer is properly earthed.WARNINGRecommended earthing methodElectrical shock hazard : Failure to follow these instructions could result in death or seriousinjury.For your personal safety, this washer must be earthed.This washer is equipped with a power supply cord ‘A’ having a earthing plug ‘B’.To minimize possible shock hazard, the cord must be plugged into a mating earth-ing-type wall receptacle ‘C’. If a mating wall receptacle is not available, it is thepersonal responsibility and obligation of the customer to have the proper earthedwall receptacle installed by a qualified electrician.CBA Level adjustment1 If the washer is installed on an unsuit-able floor, it could make considerablenoise, vibrate and cause a malfunction.

service manual

specifications

removing transit bolts

inlet hose connection

electrical requirements

operating your washer

direction for disassembly

the functions of the control panel

failure codes

Daewoo DWD-VF80M1 Service Manual

DWD-VF80M1