7■ Level floor• Allowable slope under entire washer is 1°.• To minimize noise and vibration, the washerMUST be installed on a solidly constructedfloor.• Carpeting and soft tile surfaces are notrecommended.• Never install the washer on a platform or weaklysupported structureNOTE: A firm, solid floor is even more critical to afront-loading washer than to a top-loader.If your floor is wood and/or frameconstruction, you may need to reinforce it.Front-loaders use substantially faster spinspeeds than top-loaders, causing greatervibration. If the floor is not solid, your washewill vibrate. You will hear and feel thevibration throughout your house.■ Power outlet• Must be within 60 in. (1.5 m) of either side of thewasher. Do not overload the outlet with more thanone appliance.• Time-delay fuse or circuit breaker isrecommended.NOTE: It is the personal responsibility andobligation of the customer to have a properoutlet installed by a qualified electrician.31.8"(80.9cm)1"(2.5 cm)1"(2.5 cm)[Side view]