11GENERAL PROCEDURE FOR OPERATION1. Add measured detergent to the washer, (Follow manufacturer’s directions for safe use)2. OPTIONAL STEPIf desired, add measured liquid chlorine bleach to the bleach inlet, use only liquid chlorinein the bleach inlet* Follow manufacturer’s direction for safe use.4. Close the washer lid (door)5. Press the power button.6. Select the cycle. The full automatic cycle has six settings; FUZZY, BLEACH, BLANKET, LIGHTECONOMY, WOOL.(See page 9)3. OPTIONAL STEP• Pour liquid fabric softener into the dispenser using the amount recommended on the package.Avoid dripping or spilling any fabric softener on the laundary.• Dilute fabric softener with warm water.Fill dispenser with warm water until liquid reaches the base line in the case.The dispenser is for liquid fabric softener use only. (See page 2)• The liquid fabric softener will be put into the TUB automatically when final Rinse process.7. Press the START/HOLD button.NOTE•Do not let bleach splash, drip, or run down into washerbasket.Undiluted bleach will damage any fabric it touches.•Do not use this dispenser to add powdered chlorine orcolor safe bleach to your wash load. The dispenser is forliquid chlorine bleach use only.DetergentInlet HoleBase LineSoftener inlet