76Product informationRead Carefully before UsingCautions in use of DVD-Video player are describedbelow.Please read carefully before using a DVD-Video player.✔ Installation place and handling• When you place this player near other devices,they may affect poorly together.• When you place DVD-Video player and TV inthe upper and lower sides, it may cause flickeringof pictures or failure (tape is not ejected).• When you place this player near strong magneticmaterials, it may affect image or voice poorly ordamage recording.• Do not spill volatile liquids like insect spray overthe player. Do not leave rubber or plasticproducts in contact with the player for a longtime. They will cause deterioration or paint peel-off.✔ Not in use• When the unit is not in use, be sure to remove thedisc or tape and turn off the power.• If you do not use the unit for a long period,remove batteries in remote control to preventleakage.• In case you don’t use the unit for a long time, theunit may not function properly in the future.Turn on and use the player occasionally.✔ Moving• Repack the unit as it was originally packed at thefactory. Alternatively, pack this product withtowel not to be damaged.• Eject any videotape.✔ Cleaning• Dust off dirt in cabinet or control panel partsmoothly with a soft cloth.• For heavy dirt, soak the cloth in a weak detergentsolution, wring it well and wipe. Use a dry clothto wipe it out.• Follow instructions in using chemical cleaners.• Do not use any type of solvent such as gasoline orbenzene, as they may cause deterioration or paintpeel-off.✔ Checking• Video is a high precision device. To obtain a clearscreen, we recommend regular inspection andmaintenance every 1,000 hours of use by technicalengineers.• For checking, contact your dealer or your nearestservice center.✔ Checking and Replacement of Antenna• Antenna is subject to change in its direction ordamage by wind and rain. For clean screen,contact and consult your nearest service centerabout checking and replacement.✔ In recording important screen• Be sure to record the screen and check whetherrecording is performed properly. We beg you tounderstand compensation of recording ifrecording is not performed by badness of usedtape or video.✔ Copyright• Do not use your recordings without permissionof a copyrighter except personal usage.✔ Tape and Disc Handling• Do not use any tape and disc below. Damage ofvideo head or cut/coiling of tape may causefailure.- Tape with mold- Tape or disc stained with juice or attachments- Tape having breakage connection- Disassembled tape- Disc with severe scratch• Moisture condensation may occur in tape.Moisture condensation damages the tape. Pleaseuse the tape after the moisture condensation isdisappeared.• After use, store tape vertically in a case toprevent loose.• Do not store the following places.- High temperature and humidity- Subject generation of mold- Subject to direct sunlight- Much dirt or dust- Near strong magnetic materials such as speaker✔ Video head cleaning• Video head cleaning is needed when theplayback picture becomes unclear. Use anequivalent high quality chemical non-abreasivehead cleaning tape or have them cleanedprofessionally.Identification of Controls! POWER (STANDBY/ON) buttonUse to power the device on/off if AC power supplyis connected.@ Place to insert videotape# Disc tray$ VIDEO INPUT jack% AUDIO INPUT jack^ EJECT button& RECORD button* PR Down/Up button( Operation Display WindowDisplay operation of device. For more information,see “Operation Display Window” in 8P.) SELECT buttonUse to change DVD mode to VCR mode, and viceversa.1 STOP buttonUse to stop playing.2 REWIND buttonUse to rewind currently being played videotape ordisc; or to playback back rapidly.3 Playback/PAUSE buttonPlayback videotape or disc.Press this button to pause a screen.4 FAST FORWARD buttonUse to wind currently being played videotape ordisc; or to playback rapidly.5 OPEN/CLOSE Tray buttonMain body (front panel)!% & * ) 12345^@ #$ (