87. Insert the bottom hinge at the left sideusing the two screws previously removedin step 6.NOTE: Do not tighten screws.8. Stand the cabinet.9. Replace the door making sure the bottomsocket enters the bottom hinge pin.Be sure washer is in place.10. While holding the door in the closedposition, secure the top hinge at the leftside using the two screws previouslyremoved at the beginning in step 2.Do not tighten the screws until the top ofthe door is leveled with the top cabinet.11. Replace the hinge cover.13. Tools required:-8MM & 10MM socket-ratchet.-Putty knife or thin-blade screwdriver.12. Replace plugs.7CHANGING THE REVERSIBLE DOORThis refrigerator has been built with the door hinges on the right.If you wish to change the opening direction, follow the instruction below:• Unplug the refrigerator from its electrical outlet.• Empty everything in the refrigerator, including shelves, food, etc.1. Remove the hinge cover on the right topof the cabinet.2. Remove the two screws (using a ratchettool with a 8MM socket) that hold the tophinge to the cabinet. Keep these screwsfor later use.3. Lift the top hinge straight up to free the pinfrom the socket on the top of the door.4. Lift the door and place it on a paddedsurface to prevent scratching it.5. Remove the plug buttons from the upperleft holes as illustrated and transfer themto the uncovered holes at the right side.Be sure to press the plug buttons firmlyinto the holes.6. Lay the cabinet on its side down on thefloor. Remove the two screws that holdthe bottom hinge to the cabinet using a10MM socket. Keep these screws andwasher for later use.Top hingeHinge coverPlug buttonBottom hinge