Daewoo MC2128 Instruction Manual

Contents

Daewoo MC2128 Instruction Manual Manual pdf 21 page image

To the TV via antenna cable (if you are not using a SCART cable)a n d c o p y i n gCONNECTIONSu If you are using a SCART cable, select theAV input on the TV to see the picture from thevideo.u If you are not using a SCART cable, selectthe button number on the TV reserved for videoinput to see the picture from the video.19If you are not using a SCART cable, your video can transmit pictures and sound to the TV viathe coax aerial cable. Just tune the TV to the video's transmitting channel (factory set to UHFCH 52). Tune the TV carefully to ensure the best pictures and sound.Once you have carried out the steps in"Connecting up the video recorder" (page 4),switch on your TV.Press the OK button of the video’s remote controllonger than 5 seconds to call the video´s testpicture.Tune the TV to the test picture using the channelpre-set functions of your TV as described in itsmanual.When you have found the test picture, store itunder the button number on your TV for videoinput.Press the OK button of the video’s remote controlagain longer than 5 seconds to release the testpicture.Call the video’s "MAIN MENU" choose"VCR Setup" then "RF Output Set".Type in the free channel.Store and exit.If the quality of the test picture transmitted to the TV is poor due to interference caused bya station transmitting on channel 52, you can tune the video to a different transmittingchannel. Find a free channel between 21 and 69 on your TV.u If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV mayhelp (refer to the TV manual).RF OUTPUT SET0-9:select(21-69)/ :select(BG/DK)OK:confirm MENU:endPR 52SYSTEM BG DK5 sek.2x2xMENUMENUPRPR1 2 34 5 67 8 90DV-K291DY-RB/E(GB) 00.9.8 11:9 AM ˘ ` 19