Daewoo SH-3510P Instruction Manual

Also see for SH-3510P: Instruction manual

Contents

Daewoo SH-3510P Instruction Manual Manual pdf 23 page image

21VCR PlaybackPress [ ] button to power on.Press [VCR] button of remote control to change to VCR mode.Insert the desired tape.If you want to playback, press [PLAY/PAUSE] button.When the operational status is flickering, adjust [TRACKING +/-] button.123To stop it, press [ ] button.For pause, press [PLAY/PAUSE] button in playback mode.If you press this button once more, it starts playback again.4Press [EJECT] button on the front part of the unit or [OPEN/CLOSE]button on remote control to eject the tape.5If the product, whichhas a auto-detector,detects a contaminatedhead(s), it shows theconditions to notice thecontamination onscreen.* In case of the noticeon screen, please rubthe heads with a head-cleaner followed by“How to use a head-cleaner”.Various Playback Methods If you want fast forward (or reverse) playback, press [√√√√] or [œœœœ] button inPlayback mode. You can watch fast playing cue/review (rewinding) on screen.* NOTE: You might see no colour and a noise band when you fast forward (orreverse) playback the tape which is recorded in LP mode. If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watchthe desired scene in pause status. If you want slow-motion playback, press [√√√√] button in Pause mode. You canwatch the desired scene in the slow forward (cue) playback.* NOTE: VCR doesn’t have Slow Reverse Playback function. If you want to watch a series of screens one by one, (FRAME ADVANCE) press[NEXT √√√√❚ ] button in Pause mode. Each time you press this button, the pictureadvances by one frame. If you press [REPLAY] button in playback mode, the player quickly rewinds 15seconds of the tape and plays it again. If you press [CM SKIP] button in playback mode, the player quickly skips 30seconds of the tape and then reverts to play again.To Adjust DisplayThis product includes an automatic Tracking feature and enables users to enjoy clearpictures without any additional operation. Provided that the following problems can besolved by manual adjustment, which improves display quality. (During automaticpicture adjustment, “Adjusting Display” is displayed on TV screen.)- If the picture is poor in Playback mode,- If noises occur in the upper or lower part of the picture in slow playback (cue) mode,- If paused picture vibrates up and down.Use [TRACKING +/-] buttons of remote control to adjust the display for optimumviewing.Basic Operation