TO GET STARTEDANTENNA CONNECTION1. Remove the Antenna Cable from the TV set. Connect it to the “ANT.IN” terminal ofthe VCP.2. Connect one end of the RF cable to the “ANT.OUT” terminal of the VCP.3. Connect the other end to the “ANT.IN” terminal of the TV.REMOTE CONTROL OPERATION RANGEIDENTIFICATION(continued)DAEWOO Video Cassette Player117m1. Any object between the remotecontrol and VCP will block the pathof beam when it is being used.Dark walls, direct sunshine or verybright (incandescent) light will reducethe remote control sensitivity.2. Hold the remote control within anangle range of about 30o from eitherside of the remote sensor center asshown.3. When the remote control is vertical tothe remote Sensor, it will work withinabout 23feet (7m) from the VCP.4. Point the front of the remote controldirectly at the front of the VCP.30 o 30 oBATTERY INSTALLATION1. Remove the battery cover on the reverse side of the remote control.2. Install 2 batteries (“AAA” size) into the remote control. (Carefully install batteries tomatch the polarity diagrams)3. Close the battery cover.• It is advisable to take batteries out of the remote control when it is not in use for along time.DAEWOO Video Cassette Player 12