Daewoo ST200D Instruction Manual

Contents

Daewoo ST200D Instruction Manual Manual pdf 20 page image

To the TV via antenna cable (if you are not using a RCA cable)u If you are using a RCA cable, select the AV input onthe TV to see the picture from the video.u If you are not using a RCA cable, select the buttonnumber on the TV reserved for video input to see thepicture from the video.If you are not using a RCA cable, your video can transmit pictures and sound to the TV via the coax aerialcable. Just tune the TV to the video's transmitting channel (factory set to UHF CH 52). Tune the TV carefullyto ensure the best pictures and sound.Once you have carried out the steps in"Connecting up the video recorder" (page 4),switch on your TV.Press the OK button of the video’s remote controllonger than 5 seconds to call the video´s testpicture.Tune the TV to the test picture using the channelpre-set functions of your TV as described in itsmanual.Once you have found the test picture, follow thisinstructions within your television manual to storethis new channel into a programme location.Press the OK button of the video’s remote controlagain longer than 5 seconds to release the testpicture.Call the video’s "MAIN MENU" choose"VCR Setup" then "RF Output Set".Type in the free channel.Store and exit.If the quality of the test picture transmitted to the TV is poor due to interference caused by astation transmitting on channel 52, you can tune the video to a different transmitting channel. Find afree channel between 21 and 69 on your TV.RF OUTPUT SET0-9:SELECT (21-69)/ :SELECT (BG/DK)OK:CONFIRM MENU:ENDPR 52SYSTEM BG DKu If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV may help(refer to the TV manual).19C O N N E C T I O N Sa n d c o p y i n g5 Sec.2x2x