19Normal timer recording For timer recordings, clock, date, and stations must be set correctly. Load a cassette with its safety tab in place (see page 23) and with enough free tape for the recording.1Press MENU.Choose "Timer Program" bypressing OK.There are positions for eight timerprograms.Press PR+ or PR- to select anunused program, for example ‘- - - -’then press OK to confirm.Press PR+ or PR- to select howoften you want to make therecording, for example, once, weeklyand so on. Press OK to confirm.23PR+/-:SELECT (AV1/AV2)0-9 :SETUP(PR)/ :CORRECT MENU:ENDPR --START TIME --:--END TIME --:--START DATE --/--TAPE SPEED SPPDC OFFTIMER PROGRAM (ONCE) PR : Use PR+ if you want to choosethe AV channel (see page 9) or 0 to 9for other channels. Start time : Use buttons 0 to 9 toenter the start time. End time : Use buttons 0 to 9 to enterthe end time. Start date : Use buttons 0 to 9 toenter the date. Tape Speed : Use PR+ if you want tochoose LP (see page 17). PDC : Use PR+ if you want to switchPDC on (see page 18).If PDC does not appear on the screen,it is not available on your video.If you want to change any of thedetails. Move to the details youwant to change using the andbuttons.Change the setting using the PR+ orPR- or number buttons 0 to 9.These buttons are usedon the following twopages.HOW OFTEN DO YOU WANTTO RECORD THIS PROGRAM?PR+/-:SELECTOK:CONFIRM MENU:ENDONCEWEEKLY(ONCE A WEEK)DAILY(MON-FRI)DAILY(MON-SAT)DAILY(MON-SUN)TIMER PROGRAM (ONCE)PR 01START TIME 18:10END TIME 20:30START DATE 15/08(FRI)TAPE SPEED LPPDC ONPR+/-:SELECT (AV1/AV2)0-9 : SETUP (PR)/ :CORRECTOK:CONFIRM MENU:END