Important Safety InstructionsHere is the proper use of the product and prevention of dangers as well as loss ofproperty, etc. Be sure to follow the instructions when using. Please do not place or install the device in the location with strong sunlight or nearthe heat-generating equipment, make sure the cover temperature is controlledbellow 60℃. Please do not install the device in a humid place with dust or soot, please make surethe lens cover is locked if the camera is not connected to the lens, which is to avoiddust entering the camera. Please install the device in a stable location, pay attention to prevent the devicefalling. Please do not allow water or other liquid dripping or splashing on the device andmake sure there is no object which is full of liquid placed on the device, which is toavoid liquid flowing into the device. Please install the device in a location with good ventilation, do not block theventilation opening of the device. Use the device only within the rated input and output range. Please do not dismantle the device at will. Please transport, use and store the device within the allowable range of humidityand temperature. Please connect the product with I structure to the network power output socket withprotective GND.Special Announcement Please be noted that the manual is for reference only. The manual will be regularly updated according to the product update; the updatedcontent will be added in the manual without prior announcement. The company is not liable for any loss caused by the operation which is notimplemented according to the manual. There may be some technical deviation, errors which are not consistent with theproduct function and operation or misprint, please refer to the company’s finalexplanation if there is any doubt or dispute.