Dahua ESS2016X User Manual
Also see for ESS2016X: User manual
                                                                                                                    | |
Contents
| 
ESS Series User’s Manual664 General Operation4.1 Quick GuideIf it is your first time to use this device, you can follow the steps listed below.Before the quick guide operation, please make sure: There are no free slots on the front panel. All slots are installed with the free disks. System is going to create 3 RAID5 groups. The last disk is the global hot spare disk. You can refer to chapter 4.2 to create share directory directly if it is necessary.4.2 Create Share Directory4.2.1 Create SAMBA SharePlease refer to the following flow chart for detailed information.a) Please refer to chapter 3.1 to login the WEB interface.b) Refer to chapter 3.2.3.2 to create system user and the type shall be “SAMBA/NFS/FTP”.c) Refer to chapter 3.4.3 to add RAID group.d) Refer to chapter 3.4.4 to add storage pool.e) Refer to chapter 3.4.5 to add user volume.f) Refer to chapter 3.6.1 to add SMABA share directory.i. Select the storage pool on the step 4.ii. Enable SAMBA share function and disable NFS and FTP share modeiii. Select valid user.g) Click OK button.After you created share mode, please refer to chapter 4.3.1 to access the contents of theSAMBA share directory.4.2.2 Create NFS ShareYou can refer to the steps in chapter 4.2.1 to create NFS share directory. There are slightlydifferences on the share directory setup and enable share service.Please refer to chapter 4.2.1 to quickly create NFS share.Refer to chapter 3.6.1 to enable NFS share mode and disable SAMBA and FTP share mode.4.2.3 Create FTP ShareGenerally speaking, the following flow chart is the same as the NAS share/SAMBA share. Herewe are going to introduce share setup and FTP setup. |
Related manuals for Dahua ESS2016X
manualsdatabase
Your AI-powered manual search engine