235Parameter FunctionTour Select Tour from the dropdown list. Input preset value in the column. Click Add preset button, youhave added one preset in the tour. Repeat the above procedures you can add more presets in onetour. Or you can click delete preset button to remove one preset fromthe tour.Pattern Select Pattern from the dropdown list. You can input pattern value and then click Start button to beginPTZ movement such as zoom, focus, iris, direction and etc.Then you can click Add button to set one pattern.Aux Please input the corresponding aux value here. You can select one option and then click AUX on or AUX offbutton.Light andwiperYou can turn on or turn off the light/wiper.Figure 5-115.6 ImageSelect one monitor channel video and then click Image button in section 8, the interface is shown asFigure 5-12.5.6.1 ImageHere you can adjust its brightness, contrast, hue and saturation. (Current channel border becomesgreen).Or you can click Reset button to restore system default setup.You can click this icon todisplay or hide the PTZcontrol platform.3D Intelligent PositioningKey
