1454.11.3 WIFIAfter setting WIFI, device can connect network camera via WIFI. There is no need toconnect network cable. It can lower device installation difficulty and is convenient to usethe device.Step 1 From main menu->Setting->Network->WIFI.Enter WIFI interface. See Figure 4-119.Step 2 Set parameters. Auto connect WIFI: Check the box here, system automatically connects to theprevious WIFI hotspot. Refresh: You can click it to search the hotspot list again. It can automatically add theinformation such as the password if you have set it before. Disconnect: Here you can click it to turn off the connection. Connect: Here you can click it to connect to the hotspot. System needs to turn offcurrent connection and then connect to a new hotspot if there is connection of youselected one. WIFI working status: Here you can view current connection status.Figure 4-119Step 3 Click Apply or Save to complete setup.NoteAfter successful connection, you can see WIFI connection icon at the top right corner ofthe preview interface.
