94In Figure 4-22, input tour value and then click to call a tour. Click againto stop call.Call ScanIn Figure 4-22, input Scan value and then click to call a tour. Click againto stop call.RotateIn Figure 4-22, click to enable the camera to rotate.System supports preset, tour, pattern, scan, rotate, light and etc function.Note: Preset, tour and pattern all need the value to be the control parameters. You candefine it as you require. You need to refer to your camera user’s manual for Aux definition. In some cases, itcan be used for special process.AuxClick , system goes to the following interface. The options here are defined by theprotocol. The aux number is corresponding to the aux on-off button of the decoder. SeeFigure 4-28.Figure 4-284.5.4 Auto FocusIt is to set auto focus function. Please make sure the camera supports this function.4.5.5 ColorHere you can set hue, brightness, contrast, saturation, gain, white level, color modeand etc. See Figure 4-29.
