Dahua IPC-KW10 User Manual

Also see for IPC-KW10: User manual

Contents

Dahua IPC-KW10 User Manual Manual pdf 17 page image

125555 WebWebWebWeb OperationOperationOperationOperationThis series network camera products support the Web access and management via PC.Web includes several modules: Monitor channel preview, system configuration, alarm and etc.5.15.15.15.1 Network ConnectionNetwork ConnectionNetwork ConnectionNetwork ConnectionPlease follow the steps listed below for network connection. Make sure the network camera has connected to the network properly. Please set the IP address, subnet mask and gateway of the PC and the network camerarespectively. Network camera default IP address is 192.168.1.108. Subnet mask is 255.255.255.0.Gateway is 192.168.1.1 Use order ping ***.***.***.***(* network camera address) to check connection is OK or not.5.25.25.25.2 Login andLogin andLogin andLogin and Main InterfaceMain InterfaceMain InterfaceMain InterfaceOpen IE and input network camera address in the address bar. See Figure 5- 1.Figure 5- 1 IP addressThe login interface is shown as below. See Figure 5- 2.Please input your user name and password.Default factory name is admin and password is admin.Note: For security reasons, please modify your password after you first login.Input your IPaddress here