Local Basic Operations 80Parameter Description Stop: It is to disable the BLC function.WBYou can set camera WB mode. It can affect the image whole hue sothat the image can accurately displays the environment status.Different cameras supports different WB modes such as auto,manual ,natural light, outdoor and etc.Day & NightConfigure the color and black&white mode of the image. This settingis not affected by the configuration files. The default setting is Auto. Color: The camera outputs color image only. Auto: Depends on the camera, such as overall brightness andwhether there is an IR light, either color image or black&whiteimage is output. B/W: The camera outputs Black and white image only. Sensor: It is to set when there is peripheral connected IR light.The Sensor item is for some non-IR device only.Step 3 Click Apply.4.2.5 EncodeYou can set video bit stream and image parameters.4.2.5.1 EncodeYou can set video bit stream parameters such as bit stream type, compression, resolution.Some series products support three streams: main stream, sub stream 1, sub stream 2. The substream maximally supports 1080P.Step 1 Select Main menu > CAMERA > ENCODE > ENCODE.The ENCODE interface is displayed. See Figure 4-55.
