Dahua NVR6000 Series User Manual

Also see for NVR6000 Series: User manual User manual

Dahua NVR6000 Series User Manual Manual pdf 22 page image

153 Overview of Navigation and ControlsConnect the device to the monitor and then connect a mouse and power cable. Click the powerbutton at the front panel and then boot up the device to view the video output. You can use themouse to implement some GUI operation.3.1 LoginRight click mouse, you can see system pops up the login interface for you to input user nameand password.You can use USB mouse to input. Click to switch between numeral, English character(small/capitalized) and denotation.Note:For security reason, please modify password after you first login.Continuous three times login failure will result in system alarm and five times login failure willresult in account lock.Figure 3-1After device booted up, the system is in multiple-channel display mode. See Figure 3-2.Pleasenote the displayed window amount may vary. The following figure is for reference only.Figure 3-2You can overlay the corresponding date, time and channel name on each screen. You can referto the following sheet for channel record or alarm status information.1 Recording status 3 Video loss2 Motion detection 4 Monitor lock