Dahua Smart Professional Surveillance System User Manual

Dahua Smart Professional Surveillance System User Manual Manual pdf 37 page image

33Figure 3-31Please refer to the following sheet for detailed information.Parameter FunctionProtocol Select the corresponding dome protocol such as PELCOD.Address Set corresponding dome address. Default value is 1. Please noteyour setup here shall comply with your dome address; otherwiseyou can not control the speed dome.BaudRateSelect the dome baud rate. Please set according to the speed domedial switch setup.Data Bit Please set according to the speed dome dial switch setup.Stop bit Please set according to the speed dome dial switch setup.Parity Please set according to the speed dome dial switch setup.3.6.2 Event3.6.2.1 Video DetectThe video detect includes three types: Motion detect: Through analyze video, system can enable motion detect alarm when itdetects any moving signal that reaches the sensitivity threshold you set here. Video loss: This function allows you to be informed when video loss phenomenonoccurred. You can enable alarm output channel and then enable show message fun ction. Camera masking: When someone viciously masks the lens, or the output video is in one-color due to the environments light change, the system can alert you to guarantee videocontinuity.