Dahua Technology IPC-HDB3202-DI Series User Manual

Contents

Dahua Technology IPC-HDB3202-DI Series User Manual Manual pdf 29 page image

23Figure 3-4 Installation 3ImportantPlease note Figure 3-4 is based on non-IR series camera. For IR series product, the lock screwposition and the lens angle adjustment are the same.Step 7Line up the dome camera protection enclosure and follow step 4 backward to put enclosure back.Installation is completed.NoteUsually we recommend, after the installation, please take the three white static protection gaskets fromthe accessories bag and insert them to the screw holes of the protection enclosure. It is to enhancedevice reliability.3.2.2 Manual Zoom Lens Focus OperationThe manual zoom lens focus interface is shown as in Figure 3-5.Step 1Slightly loosen the adjusting screw E and push the adjust screw E to make it swing. Adjust the lensfocus to the proper position according to the displayed video.Step 2Slightly loosen the adjusting screw F and push the adjust screw F to make it swing. Adjust the lens toget the clear video and then fix the adjusting screw firmly.Step 3Lock Screw AAdjust lend horizontalrotation angle.Lock screw B/CAdjust lens verticalrotation angle.Lock screw DAdjust lendhorizontal rotationangle.