错误!使用“开始”选项卡将 Heading 1 应用于要在此处显示的文字。 28The personal password is the password of your VTH, and it is 123456 by default, you need tochange it before using it to unlock the door. See the details in VTH user's manual. Unlock with public password/duress passwordOn standby mode, press #+ public password/duress password +#.Example: Public password/Duress password 123456, then enter #123456# to unlock. If the door is opened by the duress password, there will be alarm sent to the managementcenter. When using VTO as SIP server, the public password and duress password can beconfigured on the SIP server, see the detailed configuration in the corresponding manual. When using platform as SIP server, you need to configure the public password and duresspassword on the web interface of each VTO, and you can configure different password foreach VTO.Project ModeThe project mode is only for professional or admin people, and you can make advancedconfigurations to the VTO under this mode, including issuing access card, modifying device IPaddress, and adding room number.6.3.1 Entering Project ModeAt main interface, enter “ / +project password+#.” The default project password is888888, and you can modify it on the VTO or in the VTO web interface.In the project mode, you can use numeric keys of 2, 8, 4, and 6 as directional keys; /as return; # as confirm.6.3.2 Issuing CardIn the project mode, select Issue Card.You can issue access card with parent card or card issuing password. Issue card with parent cardSelect "Parent card", and then swipe the parent card.You can issue parent card on the SIP server. See the detailed configuration in thecorresponding manual. Issue card with passwordEnter the card issuing password, and then press # to confirm.The default card issuing password is 888888, and you can modify it in the web interface.See the VTO users' manual.Enter and confirm the number of the room to which you need to issue access card.