Dahua VTO2000A Series User Manual

Also see for VTO2000A Series: Quick start guide Quick start guide Quick install guide Connection guide User manual

Dahua VTO2000A Series User Manual Manual pdf 18 page image

13 Installation DebuggingWarning: Before debugging, the staff shall be familiar with device’s installation, wiringand usage. Beore debugging, check wiring for short or open circuit. When staff find each circuit is normal, plug the device to power. After debugging, clear the site.3.1 Modify IP AddressVTO default IP address is 192.168.1.110. Before using VTO, you shall modify VTO IPaddress to be designated IP address.Step 1. Connect VTO to power.About 60s after plugging to power, it auto boots up and enters working status.Name plate area indicator turns white.Step 2. Via direction connection of Ethernet cable to connect device and PC, set PC IPaddress to be in the same network segment with VTO IP address.Step 3. On PC, ping VTO IP command to check network.If network is normal, then continue to Step 4; if network is abnormal, pleasecheck cable connection, IP address setup and device power.Step 4. Login VTO WEB nterface, modify IP address.1. In Internet Explorer address field, enter VTO IP address, system showslogin interface.2. Enter username and password, click “login”, see Figure 3- 1.Note:Default username and password is admin and admin. After first time login, pleasemodify your login password.Figure 3- 1