4Accessory packageMachine nameplateModel nameType of refrigerantRefrigerant lineManufacture No.Oil Cooling UnitHeatDo not touch the external casing ofthe main unit or internal equipmentduring the operation (otherwise,you may burn yourself).CutWhen you carry out the maintenancework, wear gloves to prevent your handsfrom being cut by the heat exchanger.Electrical HazardYou may be seriously injured or killedbecause of an electric shock or fire. Do notopen the cover of electric component boxduring the operation.Maintenance and inspection should becarried out by qualified personnel after thepower supply is turned OFF.InstallationInstallationProcedureOil Cooling Unit and AccessoriesCheck the following items:∗ Some models do not come with accessories.Check the model name and serial No. (MFG. No.) on the nameplate attached to the right side of the Oil Cooling Unit.Oil Cooling Unit1An accessory package∗1 is attached to the top plate of the Oil Cooling Unit.Keep this manual in place where users can read it whenever required.Accessories2∗1: Before operation, be sure to remove the accessory package. Otherwise, the package blocks exhaust air flow, resulting in coolingcapacity deterioration.∗ The attachment position of the nameplate (including the machine label) may be different for some models.PIM00318A_EN.fm Page 4 Tuesday, October 26, 2010 12:37 PM