Daikin Altherma User Reference Manual

Also see for ALTHERMA: Quick guide Installation manual Installer's reference guide User guide User reference guide

Contents

Daikin Altherma User Reference Manual Manual pdf 10 page image

4 OperationUser reference guide10EABH/X16DA+9W + EAVH/X16S18+23DA6V+9WDaikin Altherma – Low temperature split4P556071-1 – 2018.101 Go to [B]: User profile.2 Enter the applicable code for the user permission. —▪ Move the cursor from left to right.▪ Browse through the list of digits and change theselected digit.▪ Confirm the pincode and proceed.Advanced user pin codeThe Advanced user pin code is 1234. Additional menu items for theuser are now visible.User pin codeThe User pin code is 0000.4.6.1 Using quiet modeAbout quiet modeYou can use quiet mode to decrease the sound of the outdoor unit.However, this also decreases the heating/cooling capacity of thesystem. There are multiple quiet mode levels.You can:▪ Completely deactivate quiet mode▪ Manually activate a quiet mode level until the next scheduledaction▪ Use and program a quiet mode scheduleINFORMATIONIf the outdoor temperature is below zero, we recommend toNOT use the most quiet level.To check if quiet mode is activeIf is displayed on the home screen, quiet mode is active.To use quiet mode1 Go to [7.4.1]: User settings > Quiet > Activation.2 Do one of the following: —If you want to… Then…Completely deactivatequiet modeSelect Off.Manually activate a quietmode levelSelect the applicable quietmode level. Example: Mostquiet.Use and program a quietmode scheduleSelect Automatic.Go to [7.4.2] Schedule andprogram the schedule. Formore information aboutscheduling, see"4.7.4 Schedule screen:Example" on page 12.Usage example: Baby is sleeping in the afternoonIf you are in the following situation:▪ You have programmed a quiet mode schedule:▪ During the night: Most quiet.▪ During the day: Off to ensure the heating/cooling capacity of thesystem.▪ However, during the afternoon the baby is sleeping and you wantit to be quiet.Then you can do the following:1 Go to [7.4.1]: User settings > Quiet > Activation.2 Select Most quiet.Advantage:The outdoor unit runs in its most quiet level.4.6.2 Using holiday modeAbout holiday modeDuring your holiday, you can use the holiday mode to deviate fromyour normal schedules without having to change them. While holidaymode is active, space heating/cooling operation and domestic hotwater operation will be turned off. Room frost protection and anti-legionella operation will remain active.Typical workflowUsing holiday mode typically consists of the following stages:1 Setting the starting date and ending date of your holiday.2 Activating the holiday mode.To check if holiday mode is activated and/or runningIf is activated on the home screen, holiday mode is active.To configure the holiday1 Activate the holiday mode. —▪ Go to [7.3.1]: User settings > Holiday > Activation.▪ Select On.2 Set the first day of your holiday. —▪ Go to [7.3.2]: From.▪ Select a date.▪ Confirm the changes.3 Set the last day of your holiday. —▪ Go to [7.3.3]: Till.▪ Select a date.▪ Confirm the changes.4.6.3 Reading out informationTo read out information1 Go to [8]: Information.Possible read-out informationIn menu… You can read out…[8.1] Energy data Produced energy, consumedelectricity, and consumed gas[8.2] Malfunction history Malfunction history[8.3] Dealer information Contact/helpdesk number[8.4] Sensors Room, tank or domestic hotwater, outside, and leaving watertemperature (if applicable)[8.5] Actuators Status/mode of each actuatorExample: Domestic hot waterpump ON/OFF[8.6] Operation modes Current operation modeExample: Defrost/oil returnmode[8.7] About Version information about thesystem[8.8] Connection status Information about the connectionstatus of the unit, the roomthermostat and the LAN adapter.