Daikin BACnet Installation And Maintenance Manual

Contents

Daikin BACnet Installation And Maintenance Manual Manual pdf 3 page image

InTroduCTIonwww.DaikinApplied.com 3 IM 1040 • VAV ACTUATORInTroduCTIonRevision HistoryManual Date HistoryIM 1040 3/5/2010 Initial releaseReference DocumentsNumber Company Title SourceOM 1063 Daikin AppliedVAV ActuatorOwnersManualwww.DaikinApplied.comLimited WarrantyConsult your local Daikin representative for warrantydetails. To find your local Daikin representative, go towww.DaikinApplied.com.NoticeCopyright © 2010 Daikin Applied, Minneapolis MN. All rightsreserved throughout the world.Daikin Applied reserves the right to change any informationcontained herein without prior notice. The user is responsiblefor determining whether this software is appropriate for his orher application.® ™ The following are tradenames or registered trademarks oftheir respective companies: BACnet from the American Societyof Heating, Refrigerating and Air-Conditioning Engineers, Inc.;Windows from Microsoft Corporation; Daikin and MicroTech IIIfrom Daikin Applied.General InformationThis manual contains the information you need to setup theelectronic outputs and calibrations for the BACnetVAV Actuatoron a VAV box.Hazard Identification MessagesDANGERDangers indicate a hazardous situation which will result indeath or serious injury if not avoided.WARNINGWarnings indicate potentially hazardous situations, which canresult in property damage, severe personal injury, or death ifnot avoided.CAUTIONCautions indicate potentially hazardous situations, which canresult in personal injury or equipment damage if not avoided.NOTICENotices give important information concerning a process,procedure, special handling or equipment attributes.DANGERElectric shock hazard Can cause personal injury orequipment damage.This equipment must be properly grounded. Connections andservice to the MicroTech® III Chiller Unit Controller must beperformed only by personnel knowledgeable in the operationof the equipment being controlled.WARNINGStatic sensitive components Can cause equipmentdamage.Discharge any static electrical charge by touching the baremetal inside the control panel before performing any servicework. Never unplug cables, circuit board terminal blocks, orpower plugs while power is applied to the panel.NOTICEThis equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordancewith this instruction manual, may cause interference to radiocommunications. It has been tested and found to comply withthe limits for a Class A digital device, pursuant to part 15 of theFCC rules. These limits are designed to provide reasonableprotection against harmful interference when the equipmentis operated in a commercial environment. Operation of thisequipment in a residential area is likely to cause harmfulinterference in which case the user will be required to correctthe interference at his or her own expense. Daikin Applieddisclaims any liability resulting from any interference or for thecorrection thereof.