Operation manual BRC1E52A725 4PW71265-1 – 10.2011The main menu has the following items.Setting and display items Description Reference pageAir FlowDirection(only if theindividual air flowfunction isinstalled)Individual setting You can set an Air flow direction for each 4flaps individually.• In case of SkyAir, maximum 4 units (unit A,B, C, D)• In case of VRV, maximum 16 units (unit 0 till15)30Individual setting list You can see the table for setting for each 4flaps.31Individual set allresetYou can clear all of the individual settings. 32Quick Start(SkyAir only)Used to set the room to a conformabletemperature quickly (unless the system isnot in program dry or fan operation).• The maximum quick cooling/heatingoperation period is 30 minutes.32VentilationVentilationoperationsettings for totalheat exchangerVentilation rate Used to set to "Low" "High" 34Ventilation mode Used to set Auto, Energy ReclaimVentilation, and Bypass. 35EnergySavingOptionsEnergy SavingOptions ListValidity or invalidity can be set up about thefollowing menus.36Setpoint RangeSettingThe setting temperature range can berestricted.It is possible to restrict the temperature rangebased on a model and the mode of operation.37Set back condition Determine the point when unit is turned offagain from the setback control. (recoverydifferential).38Sensing Sensor (low)(only if the sensingsensor is installed)When no people are detected during acontinuously fixed time, the function willautomatically change the air conditioningtarget temperature.If people are detected, it will return to thenormal set temperature.39Sensing Sensor(stop) (only if thesensing sensor isinstalled)When no people are detected during acontinuously fixed time, the function willautomatically stop the air conditioning.40Setpoint Auto Reset Even if the set temperature is changed, itreturns to the preset temperature afterprogress of a defined period of time.41Quick Reference of Main Menu Items