Daikin BRC4C61 Operation Manual

Also see for BRC4C61: Operation manual Operation manual

Contents

Daikin BRC4C61 Operation Manual Manual pdf 11 page image

English 6Placing the remote controller in theremote controller holderInstall the remote controller holder to a wallor a pillar with the attached screw. (Makesure it transmits)How to put the dry batteries(1) Remove the back coverof the remote controllerto the direction pointedby the arrow mark.(2) Put the batteriesUse two dry cell batter-ies (AAA.LR03 (alka-line)). Put dry batteriescorrectly to fit their (+)and (–).(3) Close the coverWhen to change batteriesUnder normal use, batteries last about ayear. However, change them whenever theindoor unit doesn’t respond or respondsslowly to commands, or if the displaybecomes dark.Placing theremote controllerSlide from aboveRemoving theremote controllerPull it upwardRemotecontrollerholder[CAUTIONS]• Replace all batteries at the same time, donot use new and old batteries intermixed.• In case the remote controller is not usedfor a long time remove all batteries in orderto prevent liquid leak of the battery.IN THE CASE OF CENTRALIZED CON-TROL SYSTEM• If the indoor unit is under centralized con-trol, it is necessary to switch the remotecontroller’s setting.In this case, contact your DAIKIN dealer.• Operating procedure varies with heatpump type and straight cooling type. Con-tact your Daikin dealer to confirm your sys-tem type.• To protect the unit, turn on the main powerswitch 6 hours before operation.• If the main power supply is turned off dur-ing operation, operation will restart auto-matically after the power turns back onagain.• AUTOMATIC OPERATION can beselected only by Heat recovery system.• Cooling only system gives selection ofFAN or COOLING OPERATION only.〈〈FOR SYSTEMS WITHOUT COOL/HEAT CHANGEOVER REMOTE CON-TROL SWITCH (Fig. 3)〉〉Press OPERATION MODESELECTOR button severaltimes and select the OPERATIONMODE of your choice as follows. COOLING OPERATION .................. “ ” HEATING OPERATION ................... “ ” AUTOMATIC OPERATION .............. “ ” FAN OPERATION............................ “ ”4. OPERATION PROCEDURECOOLING, HEATING, AUTOMATICAND FAN OPERATION (Fig. 3, 4)1