2Wireless Remote Controller Kit Installation manualCONTENTS1. SAFETY CONSIDERATIONS.......................................... 22. BEFORE INSTALLATION ................................................ 23. REMOTE CONTROLLER INSTALLATION ...................... 24. RECEIVER INSTALLATION............................................. 35. FIELD SETTING .............................................................. 46. TEST OPERATION.......................................................... 51. SAFETY CONSIDERATIONSPlease read these “SAFETY CONSIDERATIONS” carefullybefore installing air conditioning equipment and be sure toinstall it correctly. After completing the installation, make surethat the unit operates properly during the start-up operation.Please instruct the customer on how to operate the unit andkeep it maintained.Also, inform customers that they should store this installationmanual along with the operation manual for future reference.This air conditioner comes under the term “appliances notaccessible to the general public”.Meaning of warning, caution and note symbols.WARNING ............. Indication a potentially hazardous sit-uation which, if not avoided, couldresult in death or serious injury.CAUTION .............. Indication a potentially hazardous sit-uation which, if not avoided, mayresult in minor or moderate injury. Itmay also be sued to alert againstunsafe practices.NOTE .................... Indication situation that may result inequipment or property-damage-onlyaccidents.WARNING• Perform installation work in accordance with this instal-lation manual.Improper installation may result in electric shocks or fire.• Be sure to use only the specified accessories and partsfor installation work.Failure to use the specified parts may result in, electricshocks, fire or the unit falling.• Before touching electrical parts, turn off the unit.• Do not touch the switch with wet fingers.Touching a switch with wet fingers can cause electric shock.CAUTION• Refer also to the installation manuals attached to theindoor unit and the decoration panel.• Confirm that the following conditions are satisfied priorto installation.Ensure that nothing interrupts the operation of the wirelessremote controller. (Ensure that there is neither a source oflight nor fluorescent lamp near the receiver. Also, ensure thatthe receiver is not exposed of direct sunlight.)Ensure that the operation display lamp and other indicatorsare easy to see.• The installation position of this receiver is one corner ofthe decoration panel. Therefore, confirm that its positionis set so that the signal from the wireless remote control-ler can be easily transmitted and its display can be easilyseen.• If both this kit and fresh air intake kit are installed, onlyone duct chamber shall be used. Refer to the installationmanual of the fresh air intake kit (optional hand book).2. BEFORE INSTALLATION2-1 ACCESSORIESCheck if the following accessories are included with the unit.2-2 NOTE TO THE INSTALLERBe sure to instruct the customer how to properly operate thesystem showing him/her the attached operation manual.3. REMOTE CONTROLLER INSTALLATION• Do not throw the remote controller or impose large shocks.Also, do not store where it may be exposed to moisture ordirect sunlight.• When operating, point the transmitting part of the remotecontroller in the direction of the receiver.Name (1) Receiver (2) Wirelessremote controller(3) Remotecontroller holderQuantity 1 set 1 pc. 1 pc.ShapeName (4) Dry cell batteryLR03 (AM4) (5) Unit No. label(6) Screw for installingremote controllerholderQuantity 2 pcs. 1 pc. 2 pcs.ShapeName (7) Operationmanual(8) Installationmanual (9) Sealing padQuantity 1 pc. 1 pc. 1 pc.ShapeName (10) ClampQuantity 1 pc.Shape111222333