Daikin BS1Q-A Technical Data Manual

Contents

32• Accessories • BS1Q-A 3• Accessory • BS1Q-A2 SpecificationsStandard Accessories : Clamps;Standard Accessories : Accessory pipe;Standard Accessories : Insulation;Standard Accessories : Installation manual;Notes(1) In case of connecting with a 15-50 type indoor unit, use the accessory pipe to match the size of the field pipe. Be sure to braze the connection between the accessory pipe and thefield pipe.(2) Voltage range: units are suitable for use on electrical systems where voltage supplied to unit terminal is not below or above listed range limits.(3) Maximum allowable voltage range variation between phases is 2%.(4) MCA/MFA: MCA = 1.25 x FLA(5) MFA ≤ 4 x FLA(6) Next lower standard fuse rating minimum 15A(7) Select wire size based on the value of MCA(8) Instead of a fuse, use a circuit breaker(9) In case of connecting to a 150-160 type indoor unit, use the accessory pipe to match the size of the field pipe. Be sure to braze the connection between the accessory pipe andthe field pipe.(10) In case of connecting to a 160-200 type indoor unit, use the accessory pipe to match the size of the field pipe. Be sure to braze the connection between the accessory pipe andthe field pipe.2-1 Technical Specifications BS1Q10A BS1Q16A BS1Q25APower input Cooling Nom. kW 0.005Heating Nom. kW 0.005Maximum number of connectable indoor units 5 8Maximum capacity index of connectable indoor units 15 \< x ≤ 100 100\≤160 160\≤250Casing Material Galvanised steel plateDimensions Unit HeightxWidthxDepthmm 207x388x326Weight Unit kg 12 15Piping connections Outdoor unit Liquid Type Brazing connectionOD mm 9.5Gas Type Brazing connectionOD mm 15.9 22.2Discharge gasType Brazing connectionOD mm 12.7 19.1Indoor unit Liquid Type Brazing connectionOD mm 9.5Gas Type Brazing connectionOD mm 15.9 22.2Sound absorbing thermal insulation Foamed polyurethane Flame-resistant needle felt2-2 Electrical Specifications BS1Q10A BS1Q16A BS1Q25APower supply Phase 1~Frequency Hz 50Voltage V 220-240Voltage range Min. % -10Max. % 10Total circuit Minimum circuit amps (MCA) A 0.1Maximum fuse amps (MFA) A 15Notes Instead of a fuse, use a circuit breaker