Daikin CDXS25BVMB Installation Manual

Also see for CDKS25BVMB: Pocket Manual

Contents

Daikin CDXS25BVMB Installation Manual Manual pdf 4 page image

3J4EXIST 1CUT 2Wirelessremotecontroller J4ADDRESSJAJBJC12ADDRESS : JAEXISTCUTADDRESSIn case of rear-suction.(When shipped)AirChamber capIn case of bottom-suction. AirChamber cap500Suspension bolt pitch 7554-Suspension bolt90055Suspension bolt pitch580AnchorLong nut or turn-buckleSuspension boltIndoor unit(Installation example)Ceiling slabPREPARATIONS BEFOREINSTALLATIONRelation of the unit to the suspension boltpositionsInstall the suspension bolts.(Use M10-size bolts for the suspension bolts.)In order to reinforce the ceiling bearing the weight of theunit, use anchors when installing onto an existing ceilingor use sunken inserts, sunken anchors or othercommercially available parts when installing onto a newceiling.NOTE) All of the above parts are commercially available.Mount chamber capWhen two indoor units are installed in one room, one of the two wireless remote controllers can be easily setfor another addresses.PCB in the indoor unit• Cut the jumper JA on PCB.Wireless remote controller• Cut the jumper J4.