BRC1E73 (Wired Remote Controller) SiUS121630EA112 Remote Controller1. Operation mode2. Fan Speed3. SetpointIf ventilation icon is displayed in this field:5. Message“Error: Push Menu button”“Warning: Push Menu button”“Time to clean filter”“Time to clean element”“Time to clean filter & element”6. Ventilation7. Key Lock8. Scheduled9. Under Centralized control “ ”4. Stand by for Defrost/Hot start“ ”Used to display the current operationmode: Cool, Heat, Vent, Fan, Dry or Auto.In Auto mode, the actual operation mode(Cool or Heat) will be also displayed.Operation mode cannot be changedwhen OFF is displayed.Operation mode can be changed afterstarting operation.Displayed if an error or warning is detected.Displayed as a reminder when it is time toclean the filter and/or element.Displayed when the key lock is set.Displayed if the Schedule or Off timer isenabled.Displayed if the system is under themanagement of a multi-zone controller(Optional) and the operation of the systemthrough the remote controller is limited.Displayed when another indoor unit on thesystem has the authority to change theoperation mode between cool and heat.Displayed when an energy recoveryventilator is connected.Ventilation Mode icon.“ ”These icons indicate the current ventilationmode (ERV only) (AUTO, ERV, BYPASS).Air Purify ICON “ ”This icon indicates that the air purifying unit(Optional) is in operation.Used to display the fan speed that is set forthe indoor unit.The fan speed will not be displayed if theconnected model does not have fan speedcontrol functionality.Used to display the setpoint for the indoorunit.Use the Celsius/Fahrenheit item in themain menu to select the temperature unit(Celsius or Fahrenheit).Indicates that an energy recovery ventilator(ERV) is connected.For details, refer to the Operation Manual ofthe ERV.Displayed for a few seconds when anOperation button is pressed and the indoorunit does not provide the correspondingfunction.In a remote control group, the message willnot appear if at least one of the indoor unitsprovides the corresponding function.• ••••••••••••••••••The following messages may bedisplayed.“This function is not available”10. Changeover controlled by themaster indoor unit “ ”(VRV only)
