Daikin DCC601A51 Installation Manual

Also see for DCC601A51: Installer's reference guide

3 Specific installer safety instructionsInstallation manual3DCC601A51intelligent Tablet Controller4P414342-1D – 2020.12WARNINGImproper installation or attachment of equipment oraccessories could result in electrical shock, short-circuit,leaks, fire or other damage to the equipment. Only useaccessories, optional equipment and spare parts made orapproved by Daikin.WARNINGMake sure installation, testing and applied materialscomply with applicable legislation (on top of theinstructions described in the Daikin documentation).CAUTIONWear adequate personal protective equipment (protectivegloves, safety glasses,…) when installing, maintaining orservicing the system.WARNINGTear apart and throw away plastic packaging bags so thatnobody, especially children, can play with them. Possiblerisk: suffocation.2.2 Installation siteDo NOT install the equipment in a potentially explosive atmosphere.2.3 ElectricalDANGER: RISK OF ELECTROCUTION▪ Turn OFF all power supply before connecting electricalwiring or touching electrical parts.▪ Disconnect the power supply for more than 10 minutes,and measure the voltage at the terminals of main circuitcapacitors or electrical components before servicing.The voltage MUST be less than 50 V DC before youcan touch electrical components. For the location of theterminals, see the wiring diagram.▪ Do NOT touch electrical components with wet hands.▪ Do NOT leave the unit unattended when the servicecover is removed.WARNINGA main switch or other means for disconnection, having acontact separation in all poles providing full disconnectionunder overvoltage category III condition, shall be installedin the fixed wiring.WARNING▪ ONLY use copper wires.▪ Make sure the field wiring complies with the applicablelegislation.▪ All field wiring must be performed in accordance withthe wiring diagram supplied with the product.▪ Make sure to install earth wiring. Do NOT earth the unitto a utility pipe, surge absorber, or telephone earth.Incomplete earth may cause electrical shock.▪ Make sure to use a dedicated power circuit. NEVERuse a power supply shared by another appliance.▪ Make sure to install the required fuses or circuitbreakers.▪ Make sure to install an earth leakage protector. Failureto do so may cause electric shock or fire.WARNING▪ After finishing the electrical work, confirm that eachelectrical component and terminal inside the electricalcomponents box is connected securely.▪ Make sure all covers are closed before starting up theunit.3 Specific installer safetyinstructionsAlways observe the following safety instructions and regulations.DANGER: RISK OF EXPLOSIONThere is a risk of explosion if the internal battery isreplaced by an incorrect type.Replace the battery according to the instruction in Toreplace the data backup batteryWARNINGAll field wiring and components MUST be installed by alicensed electrician and MUST comply with the applicablelegislation.WARNING▪ Do NOT turn on the power supply before all wireconnections are completed. Not doing so may cause anelectric shock.▪ After the wiring is completed, double-check that allwires are connected correctly before turning on thepower supply.▪ All field supplied parts, materials and electric worksMUST comply with the applicable legislation.CAUTIONThe power supply is ONLY guaranteed when the "DC OK"LED on the WAGO PSU and the "CPU ALIVE" LEDs onboth the CPU module and the I/O module are blinking.If one or more of the above LEDs are NOT lighting up,check for faulty wiring.4 About the box4.1 Contents of the kitBased on the following accessory list, check that all parts andaccessories for the intelligent Tablet Controller are included in thekit. If there is any missing or defective part, contact the dealer whereyou purchased this product.