■ To start COMFORT AIRFLOW operationPress .•COMFORT AIRFLOW OperationThe air direction and flow rate are adjusted so that the air will not blow directly atpeople in the room.COMFORTCOMFORT“ ” is displayed on the LCD.COOL and DRYoperation HEAT operation FAN ONLY operationFlap direction Goes up Goes down Not availableAUTOAirflow rate■ To cancel COMFORT AIRFLOW operationPress again.•COMFORT“ ” disappears from the LCD.• The flap will return to the memory position from before COMFORT AIRFLOW operation.• The flap position will change, preventing air from blowing directly on the occupants of the room.• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.Priority is given to the function of whichever button is pressed last.• The airflow rate will be set to AUTO. If the upper and lower airflow direction is selected,the COMFORT AIRFLOW operation will be canceled.• The flow of air will be in the upward direction while in COOL operation and in the downwarddirection while in HEAT operation, which will provide a comfortable wind that will not come in direct contact with people.HEAT operationCOOL operationNotes on COMFORT AIRFLOW operation13