Daikin E-Series Service Manual

Also see for E Series: Installation manual Service manual Technical manual Service manual Service manual

Contents

Daikin E-Series Service Manual Manual pdf 314 page image

SiBE12-818 OthersOthers 3031.2 Jumper Settings1.2.1 When Two Units are Installed in One RoomWhen two indoor units are installed in one room, the two wireless remote controllers can be setfor different addresses.In case of FTXG seriesHow to set the different addresses Control PCB of the indoor unit(1) Remove the front grille. (2 screws)(2) Remove the electrical box (1 screw).(3) Remove the electrical box cover. (4 tabs)(4) Cut the address jumper JA on the control PCB. Wireless remote controller(1) Slide the front cover and take it off.(2) Cut the address jumper J4.1.2.2 Jumper SettingADDRESSJAADDRESSJAEXIST 1CUT 2(R8249)J4J4 ADRESSEXIST 1CUT 2 (R8250)Jumper(On indoor PCB) Function When connected(factory set) When cutJC Power failurerecovery function Auto start Unit does not resume operationafter recovering from a powerfailure. Timer ON-OFF settingsare cleared.JB Fan speed settingwhen compressor isOFF on thermostat.(effective only atcooling operation)Fan speed setting ;Remote controllersettingFan rpm is set to “0”